![]() |
![]() |
![]() |
GStreamer Ugly Plugins 0.10 Plugins Reference Manual | ![]() |
---|---|---|---|---|
"allow-diff-short" gboolean : Read / Write "ath-lower" gint : Read / Write "ath-only" gboolean : Read / Write "ath-short" gboolean : Read / Write "bitrate" gint : Read / Write "compression-ratio" gfloat : Read / Write "copyright" gboolean : Read / Write "cwlimit" gint : Read / Write "disable-reservoir" gboolean : Read / Write "emphasis" gboolean : Read / Write "error-protection" gboolean : Read / Write "extension" gboolean : Read / Write "force-ms" gboolean : Read / Write "free-format" gboolean : Read / Write "highpass-freq" gint : Read / Write "highpass-width" gint : Read / Write "lowpass-freq" gint : Read / Write "lowpass-width" gint : Read / Write "mode" GstLameMode : Read / Write "no-ath" gboolean : Read / Write "no-short-blocks" gboolean : Read / Write "original" gboolean : Read / Write "padding-type" GstLamePadding : Read / Write "preset" GstLamePreset : Read / Write "quality" GstLameQuality : Read / Write "strict-iso" gboolean : Read / Write "vbr" GstLameVbrmode : Read / Write "vbr-hard-min" gint : Read / Write "vbr-max-bitrate" gint : Read / Write "vbr-mean-bitrate" gint : Read / Write "vbr-min-bitrate" gint : Read / Write "vbr-quality" GstLameQuality : Read / Write "xingheader" gboolean : Read / Write
This element encodes raw integer audio into an MPEG-1 layer 3 (MP3) stream. Note that MP3 is not a free format, there are licensing and patent issues to take into consideration. See Ogg/Vorbis for a royalty free (and often higher quality) alternative.
Whilst the lame encoder element does claim to implement the GstTagSetter interface, it does so only for backwards compatibility reasons. Tag writing has been removed from lame. Use external elements like id3v2mux or apev2mux to add tags to your MP3 streams. The same goes for XING headers: use the xingmux element to add XING headers to your VBR mp3 file.
Encode a test sine signal to MP3.
gst-launch -v audiotestsrc wave=sine num-buffers=100 ! audioconvert ! lame ! filesink location=sine.mp3
Record from a sound card using ALSA and encode to MP3
gst-launch -v alsasrc ! audioconvert ! lame bitrate=192 ! filesink location=alsasrc.mp3
Transcode from a .wav file to MP3 (the id3v2mux element is optional):
gst-launch -v filesrc location=music.wav ! decodebin ! audioconvert ! audioresample ! lame bitrate=192 ! id3v2mux ! filesink location=music.mp3
Encode Audio CD track 5 to MP3:
gst-launch -v cdda://5 ! audioconvert ! lame bitrate=192 ! filesink location=track5.mp3
Last reviewed on 2006-10-13 (0.10.4)
plugin | lame |
author | Erik Walthinsen <omega@cse.ogi.edu>, Wim Taymans <wim@fluendo.com> |
class | Codec/Encoder/Audio |
allow-diff-short
" property"allow-diff-short" gboolean : Read / Write
Allow diff short.
Default value: TRUE
ath-only
" property"ath-only" gboolean : Read / Write
Ignore GPSYCHO completely, use ATH only.
Default value: TRUE
ath-short
" property"ath-short" gboolean : Read / Write
Ignore GPSYCHO for short blocks, use ATH only.
Default value: TRUE
bitrate
" property"bitrate" gint : Read / Write
Bitrate in kbit/sec (8, 16, 24, 32, 40, 48, 56, 64, 80, 96, 112, 128, 160, 192, 224, 256 or 320).
Allowed values: [8,320]
Default value: 128
compression-ratio
" property"compression-ratio" gfloat : Read / Write
let lame choose bitrate to achieve selected compression ratio.
Allowed values: [0,200]
Default value: 0
cwlimit
" property"cwlimit" gint : Read / Write
Compute tonality up to freq (in kHz) default 8.8717.
Allowed values: [0,50000]
Default value: 0
disable-reservoir
" property"disable-reservoir" gboolean : Read / Write
Disable the bit reservoir.
Default value: TRUE
error-protection
" property"error-protection" gboolean : Read / Write
Adds 16 bit checksum to every frame.
Default value: TRUE
force-ms
" property"force-ms" gboolean : Read / Write
Force ms_stereo on all frames.
Default value: TRUE
free-format
" property"free-format" gboolean : Read / Write
Produce a free format bitstream.
Default value: TRUE
highpass-freq
" property"highpass-freq" gint : Read / Write
frequency(kHz), highpass filter cutoff below freq.
Allowed values: [0,50000]
Default value: 0
highpass-width
" property"highpass-width" gint : Read / Write
frequency(kHz) - default 15% of highpass freq.
Allowed values: >= 0
Default value: 0
lowpass-freq
" property"lowpass-freq" gint : Read / Write
frequency(kHz), lowpass filter cutoff above freq.
Allowed values: [0,50000]
Default value: 0
lowpass-width
" property"lowpass-width" gint : Read / Write
frequency(kHz) - default 15% of lowpass freq.
Allowed values: >= 0
Default value: 0
no-ath
" property"no-ath" gboolean : Read / Write
turns ATH down to a flat noise floor.
Default value: TRUE
no-short-blocks
" property"no-short-blocks" gboolean : Read / Write
Do not use short blocks.
Default value: TRUE
original
" property"original" gboolean : Read / Write
Mark as non-original.
Default value: TRUE
padding-type
" property"padding-type" GstLamePadding : Read / Write
Padding type.
Default value: No Padding
quality
" property"quality" GstLameQuality : Read / Write
Quality of algorithm used for encoding.
Default value: 5 - Default
strict-iso
" property"strict-iso" gboolean : Read / Write
Comply as much as possible to ISO MPEG spec.
Default value: TRUE
vbr
" property"vbr" GstLameVbrmode : Read / Write
Specify bitrate mode.
Default value: No VBR (Constant Bitrate)
vbr-hard-min
" property"vbr-hard-min" gint : Read / Write
Specify hard min bitrate.
Allowed values: >= 0
Default value: 0
vbr-max-bitrate
" property"vbr-max-bitrate" gint : Read / Write
Specify maximum VBR bitrate (8, 16, 24, 32, 40, 48, 56, 64, 80, 96, 112, 128, 160, 192, 224, 256 or 320).
Allowed values: >= 0
Default value: 0
vbr-mean-bitrate
" property"vbr-mean-bitrate" gint : Read / Write
Specify mean VBR bitrate.
Allowed values: >= 0
Default value: 0
vbr-min-bitrate
" property"vbr-min-bitrate" gint : Read / Write
Specify minimum VBR bitrate (8, 16, 24, 32, 40, 48, 56, 64, 80, 96, 112, 128, 160, 192, 224, 256 or 320).
Allowed values: >= 0
Default value: 0
vbr-quality
" property"vbr-quality" GstLameQuality : Read / Write
VBR Quality.
Default value: 5 - Default
xingheader
" property"xingheader" gboolean : Read / Write
Output Xing Header (BROKEN, use xingmux instead).
Default value: FALSE